This release is for the OPPO BDP-10x Blu-ray Disc player


Special Notice:

  1. Once this firmware version is installed on the player, you will not be able to revert back to any previous official or public beta firmware. There will be no problem upgrading to any future official or beta firmware release.
  2. It is recommended that the user performs a "Reset Factory Defaults" operation after the firmware is installed. Please write down your special settings before doing this, and remember to re-apply your settings and adjust the proper volume level (if applicable) before you play any content. You may experience stability issues if this step is not performed.


Warning: Although a firmware upgrade is an easy and usually trouble-free process, it is important to ensure that the power supply to the player is stable, and the upgrade process is not interrupted. A failed firmware upgrade can render the player unusable.


Release Notes:


This release is for the OPPO BDP-10x Blu-ray Disc Player


Release date: January 24th, 2017.
Category: Latest Official Release


Main Version: BDP10XAU-83-1226 - DOWNLOAD HERE

Loader Version: 7B1400

Sub Version: MCU13D-01-0618


Comparing to the previous Official release version BDP10X-80-1031, the major changes included in this version are:

  1. Resolved a no audio issue when connecting via HDMI Out 1 into VIZIO P-series 4K TVs.
  2. Resolved a disc loading issue with the “A Walk in the Woods” Blu-ray Disc.
  3. Resolved a playback issue where certain ALAC files would produce static noise.
  4. Resolved an issue where the player would sometimes lock up when receiving the RS-232 command to launch VUDU.
  5. Resolved an issue where HDMI Out 2 would sometimes output RGB regardless of the HDMI Out 2 color space settings.
  6. Resolved an HDMI audio dropout issue that could occur when playing Blu-ray titles with a duration longer than three hours, such as Schindler’s List.
  7. Resolved an issue where subtitles would sometimes randomly repeat when playing MKV files with embedded PGS subtitles.
  8. Restored the ability to bitstream Dolby TrueHD audio tracks in MKV files when HDMI Audio is set to Bitstream. If you encounter a no audio issue when playing MKV files, we recommend setting the player’s HDMI Audio setting to Auto (Default) to force the player to output LPCM.
  9. Improved compatibility with WAV files using ID3 tags.
  10. Resolved an issue with gapless playback. (BDP10X-83-1226B)
  11. Resolved a no audio issue with certain receivers when playing DD+ 5.1 content from Netflix and Vudu. (BDP10X-83-0918B)
  12. Resolved an issue where the player would automatically power off when receiving commands via a TCP connection. (BDP10X-83-0918B)
  13. General disc compatibility improvements based on recent and upcoming Blu-ray releases as well as user-submitted disc samples.

All features and improvements of the previous BETA firmware are also included in this version.


Checking Your Current Firmware Version

To check the firmware version installed on your player, please go to the Setup Menu and select "Device Setup -> Firmware Information"


How to Get the Firmware Upgrade:

There are three easy ways to upgrade your player's firmware.

If your player has an Internet connection:
1. Via Network - This is the easiest and fastest way.

If your player does not have an Internet connection:
2. USB Thumb Drive - Use your computer and a USB thumb drive.

Warning: Although firmware upgrade is an easy and usually trouble-free process, it is important to ensure that the power supply to the player is stable, and the upgrade process is not interrupted. A failed firmware upgrade can render the player unusable.

Release Notes:


Upgrade Instructions


Firmware Upgrade via the Internet


Turn on your TV display and the OPPO player. Eject the disc tray from the OPPO player and remove any disc. Make sure that the player is connected to the internet and the player is not playing any content.

  1. Press the SETUP button on the remote control to enter the setup menu. Select Device Setup, Firmware Upgrade, and then Via Network.
  2. The player will start searching for the new firmware from an OPPO firmware server. Please follow the on-screen instructions to complete the firmware upgrade process. Use the remote control to respond to on-screen prompts. Do not use the front panel buttons because the front panel buttons will stop working during the upgrade process.
  3. DO NOT ATTEMPT TO TURN OFF THE PLAYER, UNPLUG THE POWER, OR PRESS ANY BUTTONS OTHER THAN NECESSARY TO RESPOND TO THE ON-SCREEN PROMPT DURING THE REMAINING UPGRADE PROCESS.
  4. In order to complete the firmware upgrade process, the player will turn off automatically.
  5. Turn on the player again. It is optional but recommended to reset the player settings by selecting "Reset Factory Defaults" in the "Setup Menu" -> "Device Setup".
  6. Repeat from Step 2 above until the player reports that it already has the latest version. This will ensure that the player downloads and installs all parts of the firmware update.
  7. Check the new firmware version by going to the setup menu, and then selecting Device Setup - Firmware Information.
  8. Enter your customised settings as necessary.
  9. Congratulations! You have just completed the firmware upgrade.


Firmware Upgrade via a USB Thumb Drive

  1. Click here to download the ZIP file for firmware version: BDP10XAU-83-1226.
  2. You will need to extract the .zip file to create the BDP10X.bin file
  3. Insert a USB thumb drive to the computer that stores the downloaded UDP10X.bin file. (The USB drive must be in FAT or FAT32 format, not NTFS. If you are not sure, just use a new USB drive that is 2GB or smaller since small drives are usually factory-formatted in FAT/FAT32.) Verify that the BIN file is in the root/main directory of the USB drive, not contained within any other folder. Ensure the file name and size are the same as shown below:USB Drive
  4. Remove the USB drive from the computer.
  5. Turn on your TV display and the OPPO player. Eject the disc tray from the OPPO player and remove any disc. Make sure that there is no other USB drive connected to the player.
  6. Insert the USB drive containing the firmware file to a USB port on the player's front or back panel.
  7. The player usually can recognise the firmware file and prompt you for firmware upgrade. In case the player does not prompt you, press the SETUP button on the remote control to enter the setup menu. Select Device Setup, Firmware Upgrade, and then Via USB.
  8. Please follow the on-screen instructions to complete the firmware upgrade process. Use the remote control to respond to on-screen prompts. Do not use the front panel buttons because the front panel buttons will stop working during the upgrade process.
  9. DO NOT ATTEMPT TO TURN OFF THE PLAYER, UNPLUG THE POWER, OR PRESS ANY BUTTONS OTHER THAN NECESSARY TO RESPOND TO THE ON-SCREEN PROMPT DURING THE REMAINING UPGRADE PROCESS.
  10. In order to complete the firmware upgrade process, the player will turn off automatically. Unplug the USB drive after the player turns itself off.
  11. Turn on the player again. It is optional but recommended to reset the player settings by selecting "Reset Factory Defaults" in the "Setup Menu" -> "Device Setup".
  12. Check the new firmware version by going to the setup menu, and then selecting Device Setup - Firmware Information. If you notice that the firmware versions displayed do not match the versions listed in this release note, please contact us to obtain the firmware files that are missing from a previous update.
  13. Enter your customised settings as necessary.
  14. Congratulations! You have just completed the firmware upgrade. Erase or discard the firmware file so you do not accidentally install the firmware again.